Creality
01020304
Official Creality Ender 3 S1 3D Printer with Double Z-axis Screw Silent Board and Direct Drive Extruder
DESCRIPTION
CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed.
Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet.
Higher Printing Precision & Easy to Install: With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. And 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer is simple and easy.
Power Loss Recovery and Filament Sensor: Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
Why CHOOSE US
High-quality printing with "Sprite" direct extruder, CR touch automatic leveling, and dual z-axis synchronization.
96% pre-installed 6-step fast assembly
Silent Motherboard, Decibel≤50dB
Resumed Printing, Save Time and Filament
Take out the Model in an Easier Way
New UI Interaction with LCD Knob Screen
4.3-inch HD Color Screen
description2
characteristic
- Materials: PLA, TPU, PETG, ABSMaterial system: Open material systemBuild size (XYZ)Print size metric: 220 x 220 x 270 mmPrint size imperial: 8.6 x 8.6 x 10.6 inchesPropertiesDiameter: 1.75 mmLayer thickness: 50 - 350 MicronsClosed print chamber: No, an open structure
- Feeder system: DirectExtruder: SingleMax. extruder temp.: 500 °F / 260 °CPrint bed details: PC spring steel sheetBed leveling: Fully automaticDisplay: 4.3" LCD displayConnectivity: Type-C USB/ SD cardCamera: No
description2
Advantage
The Ender 3 S1* is the comprehensively improved version of the Ender 3 V2. The S1 is likely to be even more successful as it includes the most popular upgrades of the Ender 3 V2 out of the box, and in an improved form.
The Ender 3 S1 has a print volume of 220 x 220 x 270 mm, a direct drive extruder with very low weight and a magnetic flexible print bed with perfect adhesion. In its price range, it is by far the best FDM 3D printer at the moment.
description2
Key Takeaways
Best FDM 3D printer in its price range
Reliable 0.1 mm accuracy with extremely rare print errors
Direct drive extruder
Magnetic, flexible print bed with perfect adhesion
Perfect for beginners and advanced users
Who Should Buy the Ender 3 S1?
The Ender 3 S1 is suitable for beginners and experienced users alike. It delivers perfect results without much calibration effort and is very user-friendly. It is the best FDM 3D printer in its price range and is the evolution of several bestsellers.
Unlike its predecessors, the Ender 3 S1 is almost completely pre-assembled. You only need to perform a few steps to fully assemble the 3D printer. Particularly critical parts, such as the toothed belts or the print head, are also already pre-assembled, which minimizes the risk of errors. Especially for beginners, the easy assembly is a big advantage.
description2
PRO
Excellent print quality
Direct drive extruder
Perfect print bed adhesion
Double Z-axis
Filament sensor
Easy setup and operation
Clever design and cable management
Belt tensioner
Tool drawer
description2
details
description2
FAQ
How long does the printer assembly take?
Ender-3 s1 product is 96% pre-assembled.
Generally, the printer can be assembled in 5-20 minutes.
Where should the consumables rack be fixed?
The consumables rack is fixed to the top of the gantry. It is placed vertically on top and secured with screws.
What if the nozzle kit still loose even if I finished the assembly?
Please tighten the eccentric nut on the back plate of the nozzle kit. After commissioning you can test by sliding it from side to side. Tight is stuck, loose is shaky
Can I use 110V?
Two voltage steps, 115V and 230V, are available for adjustment on the printer power supply.
Current frequency: 50/60Hz with 24V DC output
Please adjust the printer power supply voltage to a suitable local voltage before using the printer
Why the card has no response?
1. Please format the memory card to FAT32 format
2. Please check if the card slot is loose
3. Please wipe the card slot with a cotton swab dipped in alcohol to clean up the oxidation traces
4. Please replace the SD card slot
Does the Z-axis limit switch need to be installed?
Z-axis limit switch as the default accessory does not need to be installed. The Z-axis limit switch needs to be installed only if it is determined that the CR Touch is damaged and cannot be used.
Automatic leveling (after receiving the printer)
1. Using the CR Touch automatic leveling, you need to check the Z-axis compensation value after leveling is finished. Enter “Prepare Z-axis compensation”, adjust the Z-axis compensation value and move the Z-axis, making the height of the nozzle to the platform is almost the thickness of a piece of A4 paper (0.08-0.1mm). Click the knob to confirm and the whole leveling is completed. For more details, please refer to the leveling video and the handbook.
2. When the inclination of the whole platform is greater than 2mm, the automatic leveling steps mentioned above are not applicable and you need to use auxiliary leveling.
2.1. Using the CR Touch automatic leveling, you need to check the Z-axis compensation value after leveling is finished. Enter “Prepare Z-axis compensation”, adjust the Z-axis compensation value and move the Z-axis, making the height of the nozzle to the platform is almost the thickness of a piece of A4 paper (0.08-0.1mm). Click the knob to confirm and the whole leveling is completed. For more details, please refer to the leveling video and the handbook.
2.2. When the inclination of the whole platform is greater than 2mm, the automatic leveling steps mentioned above are not applicable and you need to use auxiliary leveling.
a) Enter "Control -Reset configuration" to reset the printer parameters.
b) Enter “Prepare - Auto Home”, return to the starting position.
c) Enter “Prepare - Move - Move Z” to clear the value.
d) Enter “Prepare - Disable stepper” to deactivate all motors.
e) Enter "Prepare - Z-offset", move Z-axis (>3mm), adjust the value of z-axis compensation so that the height of the nozzle to the platform is almost the thickness of a piece of A4 paper (0.08-0.1mm). Click the knob to confirm, the center point leveling is completed.
f) With the knob at the bottom of the hot bed, manually adjust the nozzle and make sure it’s of the same height to the four corners of the platform. For more details, please refer to the leveling video and the handbook.
2.3. If the CR Touch is broken and can only use manual leveling, the Z-axis limit switch is required to be installed.
a) Enter “Control - Reset configuration” to reset the printer parameters.
b) Enter “Prepare - Auto Home”, return to the starting point.
c) Enter into “Prepare - Disable stepper” to deactivate all motors.
d) Enter into " Prepare - Z-offset ", move Z-axis (>3mm), adjust the value of z-axis compensation, so that the height of the nozzle to the platform is almost the thickness of a piece of A4 paper (0.08-0.1mm). Click the knob to determine, the center point leveling is complete.
e) With the knob at the bottom of the hot bed, manually adjust the nozzle and make sure it’s of the same height to the four corners of the platform. For more details, please refer to the leveling video and the handbook.