0102030405
ELEGOO Neptune 4 3D Printer, 500mm/s High-Speed Fast FDM Printer with Klipper Firmware, Auto Leveling and Dual-Gear Direct Extruder, Easy Assembly for Beginners, 8.85x8.85x10.43 Inch Printing Size
DESCRIPTION
The Elegoo Neptune 4 and Elegoo Neptune 4 Pro 3D Printer offer a maximum print speed of up to 500mm/s with pre-installed Klipper firmware. These models also include a 121-point auto bed leveling system, gantry LED light strip, filament sensor, and more. The Neptune 4 Pro features an intelligent segmented heatbed and all-metal guide rails.
Fast print speed up to 500mm/s
Pre-installed Klipper firmware
121-Point Auto Bed Leveling
Select Your Print Volume: from 225x225x265mm3 to 420x420x480mm3
ELEGOO NEPTUNE 4
EQUIPPED WITH KLIPPER
The Elegoo Neptune 4 series cranks up print speed and efficiency with pre-installed Klipper firmware on the 3D printer, allowing users to reach fast maximum print speeds of up to 500mm/s.
Key Features of the Elegoo Neptune 4 series of 3D Printers:
Max Print Speed: Up to 500mm/h
Recommended Print Speed: Up to 250mm/h
Max Hotend Temperature: 300°C
Pre-installed with Klipper firmware
121-Point Auto Bed Leveling
Gantry LED light strip
Overheat protection switch
Neptune Pro features the following:
Intelligent segmented heatbed
All-metal guide rails
Three Options of Print Volume:
Neptune 4 and Neptune 4 Pro: 225×225×265mm3 (8.8×8.8×10.4in3)
Neptune 4 Plus: 320 x 320 x 385mm (12.6 x 12.6 x 3.4in3)
Neptune Max 420mm x 420mm x 480mm3 (16.5×16.5×18.9in3)
Play
FAST PRINTING WITH KLIPPER
The Elegoo Neptune 4 3D printer series, featuring a Klipper motherboard and ARM 64-bit processor, offers lightning-fast printing speeds up to 500mm/s and improved print quality via input shaping and pressure advance.
description2
Klipper firmware pre-installed
Max Print Speed: 500mm/s
Recommended: 250mm/s
Supports input shaping and pressure advance
Quickly print your models on the Elegoo Neptune 4 and Elegoo Neptune 4 Pro 3D printer which have Klipper firmware pre-installed
The Elegoo Neptune 4 and Elegoo Neptune 4 Pro 3D printers come with a direct drive extrusion setup that can handle materials up to 300C and includes a 4x4020 cooling fan for excellent heat dissipitation
UPGRADED EXTRUSION SETUP
Both the Elegoo Neptune 4 and Neptune 4 Pro maintain excellent print quality and heat dissipitation, and smooth filament extrusion for a variety of materials, even at high speeds, by utilizing a lightweight dual-gear direct extruder, extended hotend, and multiple cooling fans.
description2
Advantage
Smart segmented heated bed adds efficiency and saves energy
Overheat protection switch reduces chances of heated bed damage or fire
Customize heated bed settings based on model size
100W bed for models < 120x120mm2
250W bed for models >120x120mm2
The Elegoo Neptune 4 Pro 3D printer has a smart segmented heated bed that can manually be adjusted to heat only a small portion of the bed for models less than 120x120 in size
The Elegoo Neptune 4 and Elegoo Neptune 4 Pro 3D printers still bring quiet, precision, and stability, even at high speeds
QUIET, STABLE PRECISION
Experience quiet and precise 3D printing on the Elegoo Neptune 4 and Neptune 4 Pro with its silent drivers, smooth POM V-guide wheels, and a dual lead screw design for enhanced accuracy and stability.
description2
details
description2
About this item
Frame: CNC-machine Aluminum
Operation Noise: Below 50db
Z-Axis: Dual lead screw + dual motor
Neptune 4 Pro: All-metal guide rails
ENJOYABLE PRINTING EXPERIENCE
Printing is a pleasant experience with the Elegoo Neptune 4 series which offers a variety of practical features that add convenience and efficiency to your workflow.
Power Loss Recovery
Filament Sensor
Gantry LED light strip
Removable touchscreen
Magnetic Bed
FAQ
Magnetic 1.How to print your model via USB
step1:Plug the USB cable into the printer,a new device will appear in the Device Manager of your computer.
Step2: Install the CH341SER driver
Step3: Open the Cura slicer software and import the stl. file.
2.How to update the firmware
Step 1: Unzip the zip file and copy the files ( “bak font” folder,"bak pic"
folder and"robin mini.bin” file)to the root directory of the SD card.
Step 2: Insert the SD card into the printer, turn on the printer, and the printer
will automatically update the firmware.
Step 3: After the update is completed, the "robin mini.bin" file name will
become the uppercase "ROBIN MINI" in the SD card
3.How to replace the Nozzle Assembly
When the extrusion is not heating or is damaged.the heating value displayed on the machine touchscreen does not increase as normal.
Tips before assembly:
-lf there is an remaining filament in the nozzleturn on the machine to heat it then remove it.
-Turn off the power and wait for the printingbed to cool down before proceeding with thefollowing operation.
4.How to install the ELEGOO Cura on Macbook
Step1:Fire up the Search interface
Step2:Search for "terminal" thenclick Enter key to open it
Step3:Enter the above and press Enter Key
Step4:Input the user password
Step5:Enter the user passwordand press the Enter key
Step6:、Click "security&privacy"
Step7:Choose "Anywhere"