0102030405
Bambu Lab Textured PEI Plate
Excellent first-layer adhesion, Improved durability
Self-release when cooled down
Compatibility with various filaments
DESCRIPTION
The Bambu Texture PEI Plate features a 0.5mm thick stainless steel plate that enhanced magnetic adhesion. This helps to prevent warping and ensure optimal print quality during 3D printing, reducing the likelihood of the first layer detaching due to deformation. It also helps when printing larger models in materials that are prone to warping like ABS, PC and Nylon.
Bambu Texture PEI Plate offers a one-of-a-kind first-layer surface. Through the application of a powder-coating process, this PEI Build Plate creates a rugged texture that adds a texture to your prints.Bambu Texture PEI Plate offers a one-of-a-kind first-layer surface. Through the application of a powder-coating process, this PEI Build Plate creates a rugged texture that adds a texture to your prints.
Considerations
Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.
Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
Bambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. Do not clean the Textured PEI with Acetone, as it will damage the PEI surface.
Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
The latest firmware brings significant improvements to the Bambu Textured PEI Plate calibration using the Micro Lidar, and it is now fully compatible with the automatic calibration process.
The Textured PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.
Excellent first-layer adhesion, Improved durability
Self-release when cooled down
Compatibility with various filaments
description2
characteristic
-
Material:PEI Powder Coating + Magnetic Stainless Steel PlateSurface Temperature Resistance:Up to 180℃Printing Volume:14.7L/498.5oz.Package weight:0.45kg 0.23kg
-
Thickness: PEI Powder Coating - 0.075mmStainless Steel Plate - 0.5mm/0.4mmUsable Print Size: 256*256mm 180*180mmPackaging Size:300*270*17mm 220*190*15mm
Excellent first-layer adhesion, Improved durability
Self-release when cooled down
Compatibility with various filaments
description2
Advantage
Say goodbye to the frustration of first layer detachment due to deformation. The Bambu Texture PEI Plate is designed to provide a reliable printing surface, allowing you to achieve consistent and high-quality prints every time. Whether you’re working with materials prone to warping such as ABS, PC, or Nylon, this plate is the perfect solution for maintaining the integrity of your prints, even when working on larger models.
With the Bambu Texture PEI Plate, you can confidently tackle complex 3D printing projects without worrying about warping issues. The stainless steel base provides a sturdy foundation, while the enhanced magnetic adhesion keeps your prints firmly in place throughout the printing process. This means you can focus on bringing your designs to life without the hassle of dealing with warping or adhesion problems.
Excellent first-layer adhesion, Improved durability
Self-release when cooled down
Compatibility with various filaments
description2
details
Excellent first-layer adhesion, Improved durability
Self-release when cooled down
Compatibility with various filaments
description2
FAQ
What filaments are compatible with the Bambu Texture PEI Plate??
The Bambu Texture PEI Plate is compatible with a wide range of filaments, including common materials such as PLA, TPU, and PETG. Additionally, it can also handle materials that require high temperatures, such as ABS and Nylon.
How does the Bambu Texture PEI Plate prevent warping during 3D printing?
The Bambu Texture PEI Plate features a 0.5mm thick stainless steel plate that enhances magnetic adhesion. This helps to prevent warping and ensures optimal print quality during 3D printing. It reduces the likelihood of the first layer detaching due to deformation, especially when printing larger models in materials that are prone to warping like ABS, PC, and Nylon.