Ubudala

Imikhiqizo Izigaba

Imikhiqizo efakiwe

I-Bambu Lab AMS lite Feeder Unit

I-Bambu Lab AMS - Isistimu Yezinto Ezizenzakalelayo

I-Bambu Lab Rear Metal Panel - X1 Series

I-Bambu Lab XY Belt Tensioner enePulley

I-Bamboo Lab Thermistor - X1 Series

I-Bambu Micro Lidar (I-Dual Red Laser) - X1 Series

I-Bambu Lab PTFE Tube Connector

I-Bambu Lab Heatbed Unit V3 - X1 Series

I-Bambu Lab Liquid Glue Yokwakha Ipuleti

I-Bambu Lab Replacement Filament Cutter

0102030405

I-Creality Ender 3 S1 plus

Imodeli:I-Creality Ender 3 S1 plus

ENKULU KAKHULU ENDER 3D PRINTER YAKHA Ivolumu: amaphrinta amakhulu we-Creality Ender-3 S1 kanye ne-3d iyiphrinta ye-3D inikezela ngevolumu yokwakha evulekile engu-300 x 300 x 300 mm ekuvumela ukuthi udale amaphrinti amakhulu futhi ayinkimbinkimbi ye-3D. Le phrinta ithuthukele kuchungechunge lwe-Ender-3 S1 futhi yaziwa ngamakhono athuthukisiwe nezici zayo.Ngomthamo wayo wokwakha omkhulu, i-Ender 3 S1 Plus ikuvumela ukuthi uphrinte amamodeli anosayizi omkhulu futhi uhlangabezane nezidingo eziningi zokuphrinta.

Xhumana nathi

imininingwane yomkhiqizo

DESCRIPTION

BUYEKEZA ISIkrini sokuthinta esingu-4.3-Inch: Iphrinta ye-Creality Large FDM 3D ender 3 S1 plus iza ne-UI esebenziseka kalula esekela izilimi ezingu-9. Ukufiphala okuzenzakalelayo emizuzwini emi-3 yokonga amandla. okunikeza ukulawula okunembile nokuzulazula kubasebenzisi. Isikrini sokuthinta sisekela izilimi eziyisishiyagalolunye, okwenza kube lula kubasebenzisi emhlabeni jikelele. Ngalesi sikrini sokuthinta, abasebenzisi bangahlanganyela kalula nephrinta futhi bafinyelele izilungiselelo nezinketho ezahlukahlukene.

I-CR TOUCH-Auto-leveling ENGAKHO KOKUKHATHAZA: I-Creality auto leveling 3D Printer ender 3 S1 plus eyenzelwe ukusetshenziswa ekhaya, ihlanganisa isici esithuthukisiwe se-CR Touch Auto-leveling. Lobu buchwepheshe obuthuthukisiwe buqeda isidingo sokuleveliya kombhede mathupha, okuhlinzeka ngomuzwa ongenazinkinga uthuthukiswa yi-CR Touch. Uhlelo lwe-CR Touch Auto-leveling lusebenzisa ubuchwepheshe bokulinganisa umbhede obunamaphoyinti angu-16. Isebenza ngokuzwa ngobuhlakani ukuhlukahluka kobude kuyo yonke i-heatbed

I-"SPRITE" FULL-METAL DUAL-GEAR DIRECT DIRECT EXTRUDER: I-extruder eqondile entsha sha, engasindi futhi enamandla, eqinisekisa ukondla okushelelayo nokuphrinta kahle ngisho nangemicu eguqukayo. Ihambisana nama-filaments amaningi, amaphrinta we-Ender 3 S1 Plus 3d angaphrinta i-PLA, i-TPU, i-PETG, i-ABS.etc. Ilula kakhulu futhi ine-inertia encane kanye nokuma okunembe kakhudlwana. I-dual-gear direct extruder ethuthukisiwe ihlanganisa amagiya ensimbi amabili e-chrome asetshenziswa ngesilinganiso segiya elingu-1:3.5.

AMA-Z-AXES AMA-DUAL AMAVANISWE: Iphrinta ye-Ender-3 S1 Plus 3D ngempela inama-ax angu-Z amabili avumelanisiwe. Lokhu kulungiselelwa kuthuthukisa ukuzinza kwenqubo yokuphrinta futhi kuthuthukisa ukunemba okuphelele ngokuqinisekisa ukuthi izinhlangothi zombili ze-gantry zihamba ngokuvumelanisa okuphelele. Ngokusebenzisa amamotho amabili e-Z-axis stepper nezikulufu zokuhola, i-Ender-3 S1 Plus ingagcina ukunyakaza okulinganiselwe nokuhlelekile ku-Z-axis.

UMHLANGANO OSHESHAYO, KULULA UKUWUPHATHA:I-ender3 s1 plus ingu-96% efakwe ngaphambili, ukuhlanganiswa kwezinyathelo ezingu-6, kulula ukuyisebenzisa.

UKUBUYISWA KWAMANDLA OKULAHLEKILE KANYE NE-FILAMENT SENSOR: I-Ender-3 S1 Plus ihlanganisa umsebenzi wokuthola ukuphuma kwe-filament noma ukuphuka/ukulahlekelwa kwamandla futhi iqalise kabusha ukuphrinta ngemva kokululama, isiza ukugwema ukumoshakala kwemicu nesikhathi esibangelwa izingozi.

incazelo2

isici

Ubuchwepheshe bokubumba:I-FDM

Yakha ivolumu:300*300*300mm

Ubukhulu bomshini:557*535*655mm

Ubukhulu bephakheji:625*590*230mm

Isisindo sengqikithi:10.25kg

Isisindo esikhulu:13.4kg

Isivinini Sokuphrinta:s160mm/s, 1500mm/s2
I-Printer Precison:100mmt0.1mm

Ukuphakama Kwesendlalelo:0.1-035mm

Ubuningi beNozzle:1

Ububanzi beNozzle:0.4 mm

I-Nozzle Temperature:kufika ku-260°C

Izinga lokushisa Lombhede Wokushisa:kufika ku-100 ° CBuild Surface: ipuleti lokwakha le-PC yensimbi yasentwasahlobo

incazelo2

izici

Phrinta amamodeli anosayizi omkhulu, ahlangabezane nezidingo zokuphrinta ezengeziwe.

Yakha Ukuthuthukiswa Kwevolumu - 300*300*300 mm

I-CR Touch Auto-leveling engenazinkinga

"Sprite" I-Full-metal Dual-gear Direct Extruder

Isikrini sokuthinta esingu-4.3-intshi, Chofoza ukuze Ulawule

Izimbazo Ezimbili Ezivumelanisiwe, Ukuphrinta Okunembe Kakhulu

Umhlangano Osheshayo, Kulula Ukuwuphatha

incazelo2

Inzuzo

Iphrinta iphinde ibe nombhede we-PC Spring Steel, oqinisekisa ukunamathela okuhle kakhulu, kodwa ukususwa kwengxenye kungase kube nzima. Okunye ukuthuthukiswa okuphawulekayo kwe-Ender 3 S1 Plus ukufakwa kwe-direct drive extrusion, okuvumela ukulawula okunembe kakhudlwana kwe-filament kanye nekhwalithi engcono yokuphrinta.

I-Ender 3 S1 Plus ngokuvamile iyinguqulo ehlanganisiwe ye-Ender 3 S1 evamile, kodwa ngokuthuthukiswa okumbalwa okuvame ukufaka kalula ukusetshenziswa. Ngomthamo wokwakha ongu-300 x 300 x 300 mm, i-Plus ihlose ukuvala igebe phakathi kwesisekelo, isitayela se-Ender 3, namavolumu okwakha anosayizi ongu-CR-10, ihlinzekela labo abazizwa befakwe ebhokisini kumazandulela ayo amancane.

Iphrinta ye-Creality Ender 3 S1 Plus 3D ingumshini oqinile okwazi ukuletha isipiliyoni sokuphrinta se-3D sekhwalithi, esithembekile. Ngozimele wayo oqinile, izikulufu zokuhola ezimbili ze-Z-axis, kanye nendlela enhle kakhulu yokuphepha, kusobala ukuthi le phrinta ye-3D yaklanywa ngekhwalithi engqondweni.

Uma kuqhathaniswa namanye amaphrinta e-3D kumugqa we-S1, iwela ndawana thize phakathi. Akuyona into ecebile njengenguqulo ye-Pro, kodwa iza nokuthuthuka okumbalwa okuphawulekayo ngaphezu kwe-S1 evamile. Ukwanda kwevolumu yayo yokwakha kwenza i-Plus igqame kukho kokubili.

incazelo2

imininingwane

incazelo2

FAQ

1. Yini okufanele ngiyenze uma ikhithi ye-nozzle inyakaza ngemva kokufakwa komshini?

Qinisa i-eccentric nut kuphaneli yangemuva yekhithi yombhobho. Ngemva kokulungisa iphutha, ingashelela kwesokunxele nakwesokudla. Uma iqinile, izoba yiqhwa, futhi uma ixega, izozamazama.

2. Kungani ipulatifomu izamazama kancane ngemva kokufakwa komshini?

Lungisa i-eccentric nut esondweni elingu-V lombhede oshisayo. Uma ixega kakhulu, izozamazama, futhi uma iqine kakhulu, izoba yiqhwa.

3. Ingabe iswishi yomkhawulo we-Z-axis idinga ukufakwa?

Akukho ukufakwa okudingekayo ngokuzenzakalelayo. Uma i-CR-Touch yoleveli ezenzakalelayo ihluleka, inkinobho yomkhawulo we-Z-axis idinga ukufakwa, futhi kudingeka ileveli yokwenziwa ngesandla.