Pōpo

Lihlahisoa tsa lihlopha

Lihlahisoa tse hlahisitsoeng

Bambu Lab AMS lite Feeder Unit

Bambu Lab AMS - Automatic Material System

Bambu Lab Rear Metal Panel - X1 Series

Bambu Lab XY Belt Tensioner with Pulley

Bamboo Lab Thermistor - X1 Series

Bambu Micro Lidar (Dual Red Laser) - X1 Series

Bambu Lab PTFE Tube Connector

Bambu Lab Heatbed Unit V3 - X1 Series

Sekhomaretsi sa Mokelikeli oa Bambu Lab bakeng sa ho Haha Plate

Bambu Lab Replacement Filament Cutter

01020304

Official Creality Ender 3 S1 3D Printer e nang le Double Z-axis Screw Silent Board le Direct Drive Extruder

Official Creality Ender 3 S1 3D Printer e nang le Double Z-axis Screw Silent Board le Direct Drive Extruder

Mohlala:Creality Ender 3 S1

Dual-Gear Direct Drive Extruder: E lumellana le li-filaments tse ngata, mochine oa khatiso oa Ender 3 S1 3d o ka hatisa PLA, TPU, PETG, ABS.etc. E bobebe ho feta, 'me e na le maemo a fokolang le boemo bo nepahetseng haholoanyane. Extruder e ntlafalitsoeng ea li-dual-gear direct extruder e na le likere tse peli tsa tšepe tsa chrome tse sebelisoang ka tekanyo ea 1:3.5. Ka matla a ho fihla ho 80N, extruder e hlokomela ho fepa le ho ntša malakabe ntle le ho thella mme e sebetsa hantle haholo ho hatisa malakabe a tenyetsehang joalo ka TPU.

Iteanye le rona

lintlha tsa sehlahisoa

TLHALOSO

CR Touch Auto Bed Leveling: Theknoloji e ntlafalitsoeng ea bethe ea lintlha tse 16 ea CR Touch e u bolokela mathata a ho beha maemo ka letsoho. Ho bonolo ho e sebelisa, sistimi e bohlale ea ho leka-lekanya e ka khona ho lefella bophahamo ba khatiso ea lintlha tse fapaneng tsa mocheso oa mocheso.

Leqephe la khatiso la tšepe la Removable Spring: Ho fapana le ender3, ender 3 pro le ender 3 v2, khatiso ena e ncha ea FDM 3d e tla le sethala sa tšepe sa PC se tlosoang. Sethala sa khatiso se ncha ke motsoako oa ho roala PC, letlapa la tšepe ea selemo le sticker ea makenete, e khomarelang holimo hang ha e lokolloa. Ho roala ha PC ho tlisa ho khomarela hantle 'me mefuta e hatisitsoeng e ka tlosoa habonolo ka ho koba leqephe la khatiso.

E Phahameng ka ho Fetisisa le ho Eketsoa Ho Bonolo: Ka moralo oa Z-axis dual-screw+Z-axis dual-motor, Ender-3 S1 e sebetsa hantle le ka mokhoa o lumellanang ho theola monyetla oa mela le mapheo mahlakoreng a khatiso ea hau. ho ntlafatsa boleng ba khatiso. 'Me karolo ea 96 lekholong ea mochine oa khatiso e kentsoe esale pele, e leng se etsang hore ho kopanngoa ho be bonolo haholo ka mehato e 6 feela le tlhokomelo ea mochine oa khatiso o bonolo ebile o bonolo.

Pholiso ea Matla a Matla le Sensor ea Filament: Ender-3 S1 e na le ts'ebetso ea ho lemoha ho tsoa ha filament kapa ho senyeha / ho lahleheloa ke matla le ho tsosolosa khatiso ka mor'a ho hlaphoheloa. Ka ho rekota ka nepo lintlha tsa khatiso nakong ea ho tima ha motlakase / ho felloa ke matla kapa ho phatloha, ho thusa ho qoba tšenyo ea likhoele le nako e bakoang ke likotsi.

Ke Hobane'ng ha U RE KHETHA

Khatiso ea boleng bo holimo e nang le "Sprite" extruder e tobileng, CR touch automatic leveling, le khokahano ea z-axis tse peli.

96% e kentsoe pele ho kopano ea mehato e 6 e potlakileng

Silent Motherboard, Decibel≤50dB

Tsoela Pele ho Khatiso, Boloka Nako le Filament

Ntša Mohlala ka Tsela e Bonolo

Tšebelisano e Ncha ea UI le LCD Knob Screen

4.3-inch HD Color Screen

tlhaloso2

sebopeho

Lisebelisoa:PLA, TPU, PETG, ABS

Sisteme ea lintho tse bonahalang:Sistimi e bulehileng ea thepa

Boholo ba kaho (XYZ)

Metric ea boholo ba khatiso:220 x 220 x 270 mm

Print boholo ba borena:8.6 x 8.6 x 10.6 lisenthimithara

Thepa

Diameter:1.75 limilimithara

Lera botenya:50 - 350 Microns

Kamore ea khatiso e koetsoeng:Che, sebopeho se bulehileng
Sistimi ea phepelo:Ka ho toba

Extruder:Motho a le mong

Max. mocheso oa extruder.:500 °F / 260 °C

Printa lintlha tsa bethe:PC spring steel sheet

Ho lokisa libethe:Ka ho feletseng

Hlahisa:Pontšo ea 4.3" ea LCD

Khokahano:Mofuta oa C USB / karete ea SD

Khamera:Che

tlhaloso2

Molemo

Ender 3 S1* ke mofuta o ntlafalitsoeng ka botlalo oa Ender 3 V2. S1 e kanna ea atleha le ho feta kaha e kenyelletsa lintlafatso tse tsebahalang haholo tsa Ender 3 V2 ka ntle ho lebokose, le ka mokhoa o ntlafalitsoeng.

Ender 3 S1 e na le boholo ba khatiso ea 220 x 220 x 270 mm, extruder e tobileng ea koloi e nang le boima bo tlaase haholo le bethe ea khatiso ea makenete e nang le sekhomaretsi se phethahetseng. Ho latela theko ea eona, ke printa e ntle ka ho fetisisa ea FDM 3D hajoale.

tlhaloso2

Lintlha tsa bohlokoa

Printer e ntle ka ho fetisisa ea FDM 3D ka har'a theko ea eona

Ho tšepahala ho 0.1 mm ka liphoso tse sa tloaelehang haholo tsa khatiso

Direct drive extruder

Bethe ea khatiso ea Magnetic, e tenyetsehang e khomarelang hantle

E nepahetse bakeng sa ba qalang le basebelisi ba tsoetseng pele

Ke Mang ea Lokelang ho Reka Ender 3 S1?

Ender 3 S1 e loketse ba qalang le basebelisi ba nang le boiphihlelo ka ho tšoanang. E fana ka liphetho tse phethahetseng ntle le boiteko bo bongata ba ho lekanya 'me e bonolo ho e sebelisa. Ke khatiso e ntle ka ho fetisisa ea FDM 3D ka har'a theko ea eona mme ke phetoho ea barekisi ba 'maloa.

Ho fapana le ba pele ho eona, Ender 3 S1 e batla e kopane ka botlalo. U hloka feela ho etsa mehato e 'maloa ho kopanya printa ea 3D ka botlalo. Likarolo tse bohlokoa haholo, tse kang mabanta a meno kapa hlooho ea khatiso, le tsona li se li ntse li kopantsoe, e leng ho fokotsang kotsi ea liphoso. Haholo-holo bakeng sa ba qalang, kopano e bonolo ke molemo o moholo.

tlhaloso2

PRO

Boleng bo botle ba khatiso

Direct drive extruder

Ho khomarela bethe e phethahetseng ea khatiso

Habeli Z-axis

Sensor ea filament

Ho seta habonolo le ts'ebetso

Moralo o bohlale le taolo ea lithapo

Tensioner ea lebanta

Drawer ea lisebelisoa

tlhaloso2

lintlha

tlhaloso2

LBH

Kopano ea khatiso e nka nako e kae?

Sehlahisoa sa Ender-3 s1 se 96% se kopantsoe pele.

Ka kakaretso, mochine oa khatiso o ka bokelloa ka metsotso e 5-20.

Reka ea lisebelisoa e lokela ho lokisoa hokae?

The consumables rack e tsitsitse ka holimo ho gantry. E behiloe ka holimo 'me e sirelelitsoe ka li-screws.

Ho thoe'ng haeba sesebelisoa sa nozzle se ntse se hlephile leha ke qetile kopano?

Ka kopo, tiisa nut e ka morao poleiting ea nozzle. Ka mor'a ho laela, u ka e hlahloba ka ho e thellisa ho tloha ka lehlakoreng le leng. Tight e khomaretsoe, e hlephileng e tsitsitse

A na nka sebelisa 110V?

Mehato e 'meli ea motlakase, 115V le 230V, li teng bakeng sa ho lokisoa phepelong ea motlakase ea khatiso.

Maqhubu a hajoale: 50/60Hz e nang le 24V DC e hlahisoang

Ka kopo, fetola motlakase oa motlakase oa printa hore o be le motlakase o loketseng sebakeng sa heno pele o sebelisa printa

Ke hobane'ng ha karete e se na karabo?

1. Ka kopo fometa karete ea memori ho sebopeho sa FAT32

2. Ka kopo, sheba hore na sekotjana sa karete se hlephile

3. Ka kopo hlakola karete ea karete ka swab ea k'hothone e kenngoeng ka joala ho hloekisa mesaletsa ea oxidation.

4. Ka kopo nkela sebaka sa karete ea SD

Na switch ea moeli oa Z-axis e hloka ho kengoa?

Z-axis limit switch kaha sesebelisoa sa kamehla ha se hloke ho kengoa. Sesebelisoa sa moeli oa Z-axis se hloka ho kenngoa hafeela ho khethiloe hore CR Touch e senyehile 'me e ke ke ea sebelisoa.

Ho lekanya ka bohona (kamora ho amohela printa)

1. U sebelisa CR Touch automatic leveling, u lokela ho hlahloba boleng ba matšeliso a Z-axis ka mor'a hore boemo bo felile. Kenya "Lokisetsa matšeliso a Z-axis", fetola boleng ba matšeliso a Z-axis 'me u tsamaise Z-axis, ho etsa hore bophahamo ba nozzle sethaleng bo be botenya ba sekhechana sa pampiri ea A4 (0.08-0.1mm). Tobetsa konopo ho netefatsa mme boemo bohle bo phethetsoe. Bakeng sa lintlha tse ling, ka kopo sheba video ea boemo bo holimo le buka ea tataiso.

2. Ha tšekamelo ea sethala kaofela e le kholo ho feta 2mm, mehato ea ho ikemela ka mokhoa o itekanetseng e boletsoeng ka holimo ha e sebetse 'me ho hlokahala hore u sebelise boemo bo thusang.

2.1. U sebelisa CR Touch automatic leveling, u hloka ho hlahloba boleng ba matšeliso a Z-axis ka mor'a hore boemo bo felile. Kenya "Lokisetsa matšeliso a Z-axis", fetola boleng ba matšeliso a Z-axis 'me u tsamaise Z-axis, ho etsa hore bophahamo ba nozzle sethaleng bo be botenya ba sekhechana sa pampiri ea A4 (0.08-0.1mm). Tobetsa konopo ho netefatsa mme boemo bohle bo phethetsoe. Bakeng sa lintlha tse ling, ka kopo sheba video ea boemo bo holimo le buka ea tataiso.

2.2. Ha tšekamelo ea sethala kaofela e le kholo ho feta 2mm, mehato e itekanetseng e boletsoeng ka holimo ha e sebetse 'me u hloka ho sebelisa mokhoa o thusang.

a) Kena "Laola -Reset tlhophiso" ho reset paramente parameters.

b) Kenya "Lokisetsa - Auto Home", khutlela sebakeng sa ho qala.

c) Kenya "Lokisetsa - Tsamaisa - Tsamaisa Z" ho hlakola boleng.

d) Kenya "Lokisetsa - Disable stepper" ho tima li-motors tsohle.

e) Kena "Lokisetsa - Z-offset", tsamaisa Z-axis (> 3mm), fetola boleng ba matšeliso a z-axis e le hore bophahamo ba nozzle sethaleng bo batla bo le botenya ba sekhechana sa pampiri ea A4 (0.08). -0.1 limilimithara). Tobetsa konopo ho netefatsa, boemo bo bohareng bo phethiloe.

f) Ka kotola e ka tlaase ho bethe e chesang, ka letsoho fetola molomo oa molomo 'me u netefatse hore e bolelele bo lekanang le likhutlo tse 'nè tsa sethala. Bakeng sa lintlha tse ling, ka kopo sheba video ea boemo bo holimo le buka ea tataiso.

2.3. Haeba CR Touch e robehile 'me e ka sebelisa feela boemo ba letsoho, sesebelisoa sa moeli oa Z-axis sea hlokahala hore se kenngoe.

a) Kenya "Laola - Seta tlhophiso" ho seta liparamente tsa printa bocha.

b) Kenya "Lokisetsa - Auto Home", khutlela sebakeng sa ho qala.

c) Kena "Itokisetse - Disable stepper" ho tima li-motor tsohle.

d) Kena ka " Lokisetsa - Z-offset ", tsamaisa Z-axis (> 3mm), fetola boleng ba matšeliso a z-axis, e le hore bophahamo ba nozzle sethaleng e batla e le botenya ba sekhechana sa pampiri ea A4. (0.08-0.1mm). Tobetsa konopo ho fumana hore na ntlha e bohareng e felile.

e) Ka kotola e ka tlase ho bethe e chesang, ka letsoho fetola molomo oa molomo 'me u netefatse hore e bolelele bo lekanang le likhutlo tse' nè tsa sethala. Bakeng sa lintlha tse ling, ka kopo sheba video ea boemo bo holimo le buka ea tataiso.