Pōpo

Lihlahisoa tsa lihlopha

Lihlahisoa tse hlahisitsoeng

Bambu Lab AMS lite Feeder Unit

Bambu Lab AMS - Automatic Material System

Bambu Lab Rear Metal Panel - X1 Series

Bambu Lab XY Belt Tensioner with Pulley

Bamboo Lab Thermistor - X1 Series

Bambu Micro Lidar (Dual Red Laser) - X1 Series

Bambu Lab PTFE Tube Connector

Bambu Lab Heatbed Unit V3 - X1 Series

Sekhomaretsi sa Mokelikeli oa Bambu Lab bakeng sa ho Haha Plate

Bambu Lab Replacement Filament Cutter

0102030405

Creality Ender 3 v2 neo

Mohlala: Creality Ender 3 v2 neo

Iteanye le rona

lintlha tsa sehlahisoa

TLHALOSO

1.Easy Assembly: Ha ho bapisoa le Ender-3 V2, printa ena ea Ender-3 V2 Neo e kentsoe esale pele, 'me kopano e hloka mehato e 3 feela. E na le botsoalle bo lekaneng ho basebelisi le ba qalang ts'ebetsong ea kopano, e tla boloka nako e ngata. Ho loketse hore bareki ba e kenye ka tsela e potlakileng, e sebetsang haholoanyane.

2.CR Touch Auto Bed Leveling: Theknoloji e ntlafalitsoeng ea libethe tsa CR Touch 16-point e u pholosa bothateng ba ho beha maemo ka letsoho. Ho bonolo ho e sebelisa, sistimi e bohlale ea ho leka-lekanya e ka khona ho lefella bophahamo ba khatiso ea lintlha tse fapaneng tsa bethe e chesang. E boloka nako e ngata bakeng sa bareki ka tokiso ea nako e telele ea boemo bo holimo, e phethela ts'ebetso ea boemo kapele.

3.Brand New 4.3 Inch User Interface: UI e ntlafalitsoeng e eketsa ts'ebetso ea mohlala, e nolofalletsa ho bona sebopeho sa khatiso le tsoelo-pele ea bareki. E leng ho loketseng hore u tsebe ka boemo ba mohlala. Hape, e tšehetsa lipuo tse robong bakeng sa tlhokahalo e fapaneng ea bareki.

4.PC ea tšepe ea tšepe ea tšepe ea selemo: E fapane le ender 3, ender 3 pro le ender 3 v2, khatiso ena e ncha ea FDM 3d e tla le poleiti e ka ntshuwang ea PC spring steel build. Sethala sa khatiso se ncha ke motsoako oa ho roala PC, letlapa la tšepe ea selemo le sticker ea makenete, e khomarelang holimo hang ha e lokolloa. Ho roala ha PC ho tlisa sekhomaretsi se setle bakeng sa filament, 'me mefuta e felileng e ka tlosoa habonolo ka ho koba letlapa la khatiso.

5.Silent Motherboard: The mainboard ke 4.2.2 version empa ke mainboard e khutsitseng e fapaneng le ender 3 mainboard. Ender-3 V2 Neo ena e nang le lebokose la "mama" le khutsitseng le iketselitseng, le nang le ts'ebetso e matla ea ho thibela ho kena-kenana le ts'ebetso e potlakileng le e tsitsitseng haholoanyane, khatiso e khutsitseng le ts'ebetso e tlaase ea decibel, e etsa hore ho be le sebaka se khutsitseng. e nang le matla a maholo a extrusion mme e tšoarella haholoanyane, e fokotsang kotsi ea ho thijoa ha nozzle.

tlhaloso2

sebopeho

Theknoloji:Mokhoa o kopaneng oa ho beha lintho (FDM)

Selemo: 2022

Kopano:E kopane hanyane

Tlhophiso ea mochini:Hlooho ea Cartesian-XZ

Moetsi:Pōpo

LITŠOANTŠISO TSA 3D PRINTER

Theha molumo:220 x 220 x 250 mm

Sistimi ea phepelo:Bowden

Hlooho ea ho hatisa:Nozzle e le 'ngoe

Boholo ba nozzle:0.4 limilimithara

Max. mocheso qetellong ea mocheso:260 ℃

Max. mocheso oa bethe e futhumetseng:100 ℃

Printa lisebelisoa tsa bethe:Letlapa la tšepe ea selemo le koahetsoeng ka PC

Frame:Aluminium

Ho lokisa libethe:Ka ho iketsa

Boima ba 'mele:9,8 lik'hilograma
Hlahisa:LCD ea 4.3-inch

Khokahano:Karete ea SD, USB

Printa recovery:Ee

Sensor ea likhoele:Ee

Khamera:Che

LITŠOANTŠISO

Bophara ba khoele:1.75 limilimithara

Filament ea motho oa boraro:Ee

Lisebelisoa tsa Filament:PLA, ABS, PETG, Flexible

SOFTWARE

Selaoli se khothalelitsoeng:Creality Slicer, Cura, Simplify3D, Repetier-Host

Mokhoa oa tšebetso:Windows, Mac OSX, Linux

Mefuta ea lifaele:STL, OBJ, AMF

LITEKELO LE KHETHO

Boholo ba foreimi:438 x 424 x 472 limilimithara

tlhaloso2

Likarolo tsa Bohlokoa

8.7 x 8.7 x 9.8" Sebaka sa Moaho

0.05 ho 0.35 mm Layer Resolution
Moqapi o le Mong oa Extruder

1.75mm Tšehetso ea Filament

tlhaloso2

Molemo

Creality Ender 3 V2 Neo e tla e tloaelehileng e nang le likarolo tse ngata tsa sejoale-joale ha e ntse e le ka har'a theko ea tekanyetso. Letoto la khatiso la Ender 3 le se le tumme haholo ho tloha ha le hlahisoa, 'me ka mabaka a utloahalang. Li theko e tlase haholo 'me li fana ka boleng bo holimo ba khatiso. Ka molumo oa khatiso oa 220 x 220 x 250 mm (X, Y, Z), li ntse li le khōlō ho lekana ho hatisa mehlala le likaroloana tse nyenyane, 'me li ke ke tsa nka sebaka se sengata holim'a deske.

Mofuta oa V2 Neo o eketsa lintlafatso tse 'maloa ho Ender 3 ea khale, ho kenyeletsoa boemo ba bethe ea koloi, bakhanni ba likoloi ba khutsitseng, le ponts'o ea LCD ea mebala. Ender 3 V2 Neo e ile ea lokolloa ka 2022 e le phetisetso e latelang ea Ender 3 V2. Ho feta moo, Ender 3 V2 Neo e romelloa hoo e ka bang e kopane ka botlalo, kahoo o ka e etsa hore e hlome le ho sebetsa ka nako e ka bang metsotso e 15.

Ender 3 V2 Neo e kentse boemo ba bethe ea koloi, mochini oa tšepe, le bethe ea tšepe ea tšepe bakeng sa keketseho e itekanetseng ea $ 40 ea theko, e leng ea bohlokoa haholo (ho ntlafatsa bethe ea koloi feela ho tla bitsa $ 50).

Ender 3 V2 Neo hangata e tla ka $80-100 ho feta Ender 3, empa re nahana hore e tšoanela litšenyehelo tse ling. Ka likarolo tsa eona tsa sejoale-joale le moralo o ntlafalitsoeng, ona ke printa e nang le maikutlo a holimo ka har'a sephutheloana sa theko e tlase.

Ender 3 V2 NEO e entsoe ka lintlafatso ho likarolo tse itseng tsa Ender 3 V2 kelellong. Ka tsela ena, Ender 3 V2 NEO e kenyelletsa CR Touch auto leveling e nang le puseletso ea bophahamo ba khatiso ea lintlha tse 16 ho kenyelletsa le karolo ea boemo ba letsoho e teng ho Ender 3 V2. Ho beha maemo ho thusa ho ntlafatsa ho nepahala le ho sebetsa hantle, ka hona ho boloka nako le matsapa a mosebelisi. Extruder ea polasetiki e nkeloe sebaka ke tšepe e tšoarellang ea Bowden extruder e nang le matla a maholo a extrusion. Extruder ho Ender 3 V2 NEO e na le knob e eketsehileng ea rotary ho thusa ho fepa hantle le ho khutlisa filament.

Likarolo tse khethollang ka ho fetesisa tsa printa ea Ender 3 V2 NEO 3D ke kopano ea eona e bonolo ea mehato e 3, karolo ea ponelopele ea mohlala e sehiloeng le poleiti ea tšepe ea selemo. Mabapi le sebopeho sa mohlala o sehiloeng, se lumella mosebelisi ho bona mohlala kaha o tla shebahala o hatisitsoe pele o qala ho hatisa.

tlhaloso2

lintlha

tlhaloso2

LBH

Na Ender 3 V2 Neo e bohlokoa?

Ka mabaka ana, ka sebele re khothaletsa Creality Ender 3 V2 Neo, haholo-holo bakeng sa ba qalang ho hatisa 3D kapa ba batlang likarolo tsa morao-rao ka tekanyetso. Theko e utloahala bakeng sa seo u se fumanang-e bokana ka potlako haholo, 'me e hatisa ka nepo ka boiteko bo fokolang.

Na Ender 3 V2 Neo e molemo bakeng sa ba qalang?

E lokela ho ba printa e bonolo ka ho fetisisa ea 3D bakeng sa ba qalang. Ka likarolo tse ngata tse kentsoeng esale pele, u ka etsa hore Ender 3 V2 Neo ea hau e sebetse habonolo.

Na Ender 3 V2 Neo e ka hatisa nylon?

Haeba u na le printa ea Creality 3D joalo ka Ender 3 kapa CR-10, u kanna oa botsa: na nka hatisa ka nylon ho printa ea ka ea 3D, kapa ho khoneha feela ho liprinta tsa 3D tsa boemo ba khoebo? Ka lehlohonolo, ho hatisa ka nylon ho ka khoneha ka li-printer tsa Creality 3D, leha ho le joalo ha se ntho e bonolo ho sebetsa ka eona.

Ke filament efe bakeng sa Ender 3 V2 Neo?

1.75mm PLA Boitsebiso: Polylactic Acid (PLA)

Na Ender 3 V2 Neo e na le sensor ea filament?

Ender 3 (V2 / Pro) Filament Sensor Upgrade: 3 Mehato e Bonolo | All3DP

Ender 3, Pro, le V2 kaofela li tšoana hantle, ntle le Ender 3 V2 e ntlafalitsoeng (V4. 2.2 kapa V4. 2.7) 32-bit mainboard. Letlapa le lecha le na le likou tse eketsehileng bakeng sa BLTouch le sensor ea filament runout, hammoho le bootloader e kentsoeng pele bakeng sa ho bonesa firmware e ncha ka slot ea karete ea MicroSD.

A na u ka sebelisa PETG ka Ender 3 V2 Neo?

Khatiso ea 3D PETG ho Ender 3 e ka bonahala e le boima, empa ka mehato e nepahetseng ea ho khomarela bethe, u ka sebelisa boitsebiso bona habonolo.

Ke etsa joang hore Ender 3 V2 Neo eaka e hatisoe ka potlako?

Ho theola boima ba ho infill ke tsela e tiileng ea ho fokotsa nako ea khatiso (le tšebeliso ea thepa) bakeng sa mohlala. Bophahamo ba lera: Bophahamo ba lera ke e 'ngoe ea litlhophiso tsa bohlokoahali bakeng sa printa ea 3D. Bophahamo ba lera bo laola hore na lera le leng le le leng le lelelele hakae, 'me ha tlhophiso ena e le tlase, matlalo a tla ba teng khatisong ea 3D.