Pōpo

Lihlahisoa tsa lihlopha

Lihlahisoa tse hlahisitsoeng

Bambu Lab AMS lite Feeder Unit

Bambu Lab AMS - Automatic Material System

Bambu Lab Rear Metal Panel - X1 Series

Bambu Lab XY Belt Tensioner with Pulley

Bamboo Lab Thermistor - X1 Series

Bambu Micro Lidar (Dual Red Laser) - X1 Series

Bambu Lab PTFE Tube Connector

Bambu Lab Heatbed Unit V3 - X1 Series

Sekhomaretsi sa Mokelikeli oa Bambu Lab bakeng sa ho Haha Plate

Bambu Lab Replacement Filament Cutter

0102030405

2024 New Creality CR-Scan Raptor 3D Scanner Blue Laser & Nir Light Anti-Shaking Handheld Scanner

2024 New Creality CR-Scan Raptor 3D Scanner Blue Laser & Nir Light Anti-Shaking Handheld Scanner

【The First Multiple-line Blue & NIR Consumer 3D Scanner】 Creality CR-Scan Raptor Scanner e kopanya motsoako o mocha oa mehloli ea leseli le leputsoa, e koahelang lisebelisoa tsa lintho tse nyenyane, tse mahareng le tse kholo, tse ka finyellang litlhoko tsa mefuta e fapaneng ea 3D ea indasteri. scenarios.7 mela e putsoa e ts'oanang bakeng sa lintlha tse hlakileng tsa ho hlahloba, mohala o le mong o mosesaane haholo, o fihla ho 0.1mm ho fumana likarolo tse bohale le tse hlakileng. - ho hlahloba ka nepo.
【High-Speed Scanning】 Raptor scanner light light lightning lebelo ho fihla ho 60fps, nir scanning speed e fihla ho 20fps. o kopanya mohala o nang le mabone a hlophisitsoeng a infrared, lisebelisoa li ka nka lintho ho tloha ho 5 * 5 * 5 mm, -2000 * 2000 * 2000 mm. ka matsapa a ho skena litšoantšo tse nyane, liboutu, lifahleho, 'mele ea batho, likarolo tsa koloi, le tse ling, ho skena ka mefuta-futa bakeng sa boholo bohle. CR-Scan Raptor e sebelisa matheba a matching 3D imaging.Ha ho matšoao a hlokahalang bakeng sa lisebelisoa tse nang le likarolo tse ngata. scan kapele le ka kotloloho.
【Anti-Shake, Smoothand Efficient Scanner】Raptor Scanner E na le theknoloji ea ho nka litšoantšo ea One-Shot 3D, ka tlhaho e tsitsitse, 'me ha ho bonolo ho latela tahlehelo. Lebelo la ho khutlela morao ka potlako le etsa bonnete ba hore ho hlahlojoa ka letsoho ho bonolo, ho potlakisa ho fihla ho fps tse 20. Ka nako e ts'oanang, lense e na le tšobotsi ea autofocus ho etsa bonnete ba hore ha u na phihlelo e mpe ea ho hlahloba joaloka liforeimi tse lahlehileng kapa defocus nakong ea ho hlahloba.

Qeto ea khamera ea setšoantšo sa 3D 1920x1200
Leseli la Tlatsetso ea 'Mala: Li-LED tse 12 tse tšoeu
Ntlafatso ea Tsebiso ea Letshwao Li-LED tse 12 tsa infrared
Tšireletso ea Laser Sehlopha sa I (se bolokehileng sa mahlo)
Konopo Mechini
Sebopeho sa tlhahiso OBJ/STL/PLY
Lisebelisoa tsa Litekanyo 215mmx50mmx74mm
Sesebediswa Weight 372g
Ho hlahloba ka Waelese E tšehetsoa hammoho le lisebelisoa tsa nakong e tlang tsa ho hlahloba ka waelese

Iteanye le rona

lintlha tsa sehlahisoa

litlhaloso

molemo

【24-Bit Full-Colour Scanner】Raptor Scanner E na le mabone a 12 a chitja a LED, e ka ntlafatsa ho benya ha 'mapa oa mebala sebakeng se lefifi le ho hlahisa 'mala oa lintho. scanning results.Blue Light Provides supplementary lightfor laser line scanning.White Light Used to enhance the brightness of color textures.
【Lintlafatso tse ling】1️⃣Le ntle le ho skena spray, o ka sekena likoloi, likarolo tsa koloi, lithaere, le lintho tse ling tse ntšo/tšepe ho fumana sephetho se lakatsehang.2️⃣'Mele o na le li-buttons 𝐋𝐢𝐠𝐡𝐭 e fana ka maikutlo a boemo ba nako ea ho hlahloba ka nako ea nnete,𝐏𝐚𝐢𝐫𝐞𝐝 𝐰𝐢𝐭𝐡 𝐁𝐮𝐭𝐭𝐨𝐧𝐬, e fana ka tshebetso e phutholohileng le e otlolohileng.3️⃣Lightweight 372g,One-hand Control,E fokotsa ka katleho mosebetsi wa nako e telele mokhathala ho nepahala calibration, o ka boloka ho nepahala ho phahameng ea scanner, boloka ho nepahala.
【Ho tsamaellana le sethala】U ka e sebelisa ho Windows kapa MacOS link scanner.CrealityScan ke sesebelisoa sa porofeshenale sa 3D se sebetsanang hantle le basebelisi le bokhoni bo matla ba ho sebetsana le leru. Ka lithuto tsa eona tsa mohato ka mohato, ts'ebetso ea ho tobetsa ha 'ngoe feela! le likarolo tsa ho hlophisa mohlala, e ka qala leeto la hau la ho senka habonolo.

Mokhoa oa ho Skena: Leseli le Leputsoa (Laser ea Blue 7-line) / NIR (lebone le hlophisitsoeng la infrared binocular)

>>Mokhoa oa Leseli le Leputsoa(Blue 7-line laser):

Ho nepahala: Ho fihla ho 0.02mm @ 100mm [1]

Qeto ea 3D: 0.02-2mm

Lebelo la ho skena: Ho fihla ho 60fps

Min. bophahamo ba modumo: 5mm x 5mm x 5mm

Single Capture Range: 270mmx170mm@300mm

Sebaka sa ho sebetsa: 150mm-400mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa

>> NIR(lebone le hlophisitsoeng la infrared binocular) Mokhoa:

Ho nepahala: Ho fihlela ho 0.1mm

Qeto ea 3D: 0.1-2mm

Lebelo la ho skena: Ho fihla ho 20fps

Single Capture Range: 930mmx580mm@1000mm

Sebaka sa ho sebetsa: 170mm-1000mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa / geometry / sebopeho

Liparamente tse akaretsang:

Qeto ea khamera ea setšoantšo sa 3D: 1920x1200

Leseli la Tlatsetso ea Mobala: Li-LED tse 12 tse tšoeu

Ntlafatso ea Tsebiso ea Letšoao: Li-LED tse 12 tsa infrared

Tšireletseho ea Laser: Sehlopha sa I (se bolokehileng mahlong)

Konopo: Mechini

IMU: Ho joalo

Sebopeho sa tlhahiso: OBJ/STL/PLY

Matla a Kenang: 12V 2A

Sehokelo sa data: TypeC/USB3.0

Lisebelisoa: 215mmx50mmx74mm

Boima ba sesebelisoa: 372g

Boto ea ho lekanya: Boto ea likhalase e nepahetseng ka ho fetesisa

Scanning e senang Wireless: E ts'ehelitsoe mmoho le lisebelisoa tsa kamoso tsa ho sekena ka waelese

Ts'ehetso ea Sisteme: Windows / macOS

Mocheso o sebetsang: -10°C ho isa ho 40°C

Mongobo o sebetsang: 0-90%RH

Mokhoa oa ho Skena: Leseli le Leputsoa (Laser ea Blue 7-line) / NIR (leseli le hlophisitsoeng la infrared binocular)

>>Mokhoa oa Leseli le Leputsoa(Blue 7-line laser):

Ho nepahala: Ho fihla ho 0.02mm @ 100mm [1]

Qeto ea 3D: 0.02-2mm

Lebelo la ho skena: Ho fihla ho 60fps

Min. bophahamo ba modumo: 5mm x 5mm x 5mm

Single Capture Range: 270mmx170mm@300mm

Sebaka sa ho sebetsa: 150mm-400mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa

>> NIR(lebone le hlophisitsoeng la infrared binocular) Mokhoa:

Ho nepahala: Ho fihlela ho 0.1mm

Qeto ea 3D: 0.1-2mm

Lebelo la ho skena: Ho fihla ho 20fps

Single Capture Range: 930mmx580mm@1000mm

Sebaka sa ho sebetsa: 170mm-1000mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa / geometry / sebopeho

Liparamente tse akaretsang:

Qeto ea khamera ea setšoantšo sa 3D: 1920x1200

Leseli la Tlatsetso ea Mobala: Li-LED tse 12 tse tšoeu

Ntlafatso ea Tsebiso ea Letšoao: Li-LED tse 12 tsa infrared

Tšireletseho ea Laser: Sehlopha sa I (se bolokehileng mahlong)

Konopo: Mechini

IMU: Ho joalo

Sebopeho sa tlhahiso: OBJ/STL/PLY

Matla a Kenang: 12V 2A

Sehokelo sa data: TypeC/USB3.0

Lisebelisoa: 215mmx50mmx74mm

Boima ba sesebelisoa: 372g

Boto ea ho lekanya: Boto ea likhalase e nepahetseng ka ho fetesisa

Scanning e senang Wireless: E ts'ehelitsoe mmoho le lisebelisoa tsa kamoso tsa ho sekena ka waelese

Ts'ehetso ea Sisteme: Windows / macOS

Mocheso o sebetsang: -10°C ho isa ho 40°C

Mongobo o sebetsang: 0-90%RH

Ho nepahala ho hlahlojoa maemong a laboratori (setekanyo ke 100mm sphere pair) mme liphetho tsa 'nete li ka angoa ke maemo a ts'ebetso joalo ka mocheso, thothomelo, le lintlha tse ling.

7 Blue Parallel Laser Lines

Ho nepahala ha Kereiti ea Metrology, ho fihla ho 0.02mm

Ho skena kapele ho fihla ho 60fps

Lintho tse pakeng tsa 5-2000mm

Anti-Shaking for Smooth Scanning

Skena lintho tse ntšo / tsa tšepe ntle le li-sprays

24-Bit Ho Sekena ka Mebala e Tletseng

Leseli le Compact(215mmx50mmx74mm), boima ba 372g feela

【24-Bit Full-Colour Scanner】Raptor Scanner E na le mabone a 12 a chitja a LED, e ka ntlafatsa ho benya ha 'mapa oa mebala sebakeng se lefifi le ho hlahisa 'mala oa lintho. scanning results.Blue Light Provides supplementary lightfor laser line scanning.White Light Used to enhance the brightness of color textures.
【Lintlafatso tse ling】1️⃣Le ntle le ho skena spray, o ka sekena likoloi, likarolo tsa koloi, lithaere, le lintho tse ling tse ntšo/tšepe ho fumana sephetho se lakatsehang.2️⃣'Mele o na le li-buttons 𝐋𝐢𝐠𝐡𝐭 e fana ka maikutlo a boemo ba nako ea ho hlahloba ka nako ea nnete,𝐏𝐚𝐢𝐫𝐞𝐝 𝐰𝐢𝐭𝐡 𝐁𝐮𝐭𝐭𝐨𝐧𝐬, e fana ka tshebetso e phutholohileng le e otlolohileng.3️⃣Lightweight 372g,One-hand Control,E fokotsa ka katleho mosebetsi wa nako e telele mokhathala ho nepahala calibration, o ka boloka ho nepahala ho phahameng ea scanner, boloka ho nepahala.
【Ho tsamaellana le sethala】U ka e sebelisa ho Windows kapa MacOS link scanner.CrealityScan ke sesebelisoa sa porofeshenale sa 3D se sebetsanang hantle le basebelisi le bokhoni bo matla ba ho sebetsana le leru. Ka lithuto tsa eona tsa mohato ka mohato, ts'ebetso ea ho tobetsa ha 'ngoe feela! le likarolo tsa ho hlophisa mohlala, e ka qala leeto la hau la ho senka habonolo.

Mokhoa oa ho Skena: Leseli le Leputsoa (Laser ea Blue 7-line) / NIR (lebone le hlophisitsoeng la infrared binocular)

>>Mokhoa oa Leseli le Leputsoa(Blue 7-line laser):

Ho nepahala: Ho fihla ho 0.02mm @ 100mm [1]

Qeto ea 3D: 0.02-2mm

Lebelo la ho skena: Ho fihla ho 60fps

Min. bophahamo ba modumo: 5mm x 5mm x 5mm

Single Capture Range: 270mmx170mm@300mm

Sebaka sa ho sebetsa: 150mm-400mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa

>> NIR(lebone le hlophisitsoeng la infrared binocular) Mokhoa:

Ho nepahala: Ho fihlela ho 0.1mm

Qeto ea 3D: 0.1-2mm

Lebelo la ho skena: Ho fihla ho 20fps

Single Capture Range: 930mmx580mm@1000mm

Sebaka sa ho sebetsa: 170mm-1000mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa / geometry / sebopeho

Liparamente tse akaretsang:

Qeto ea khamera ea setšoantšo sa 3D: 1920x1200

Leseli la Tlatsetso ea Mobala: Li-LED tse 12 tse tšoeu

Ntlafatso ea Tsebiso ea Letšoao: Li-LED tse 12 tsa infrared

Tšireletseho ea Laser: Sehlopha sa I (se bolokehileng mahlong)

Konopo: Mechini

IMU: Ho joalo

Sebopeho sa tlhahiso: OBJ/STL/PLY

Matla a Kenang: 12V 2A

Sehokelo sa data: TypeC/USB3.0

Lisebelisoa: 215mmx50mmx74mm

Boima ba sesebelisoa: 372g

Boto ea ho lekanya: Boto ea likhalase e nepahetseng ka ho fetesisa

Scanning e senang Wireless: E ts'ehelitsoe mmoho le lisebelisoa tsa kamoso tsa ho sekena ka waelese

Ts'ehetso ea Sisteme: Windows / macOS

Mocheso o sebetsang: -10°C ho isa ho 40°C

Mongobo o sebetsang: 0-90%RH

Mokhoa oa ho Skena: Leseli le Leputsoa (Laser ea Blue 7-line) / NIR (lebone le hlophisitsoeng la infrared binocular)

>>Mokhoa oa Leseli le Leputsoa(Blue 7-line laser):

Ho nepahala: Ho fihla ho 0.02mm @ 100mm [1]

Qeto ea 3D: 0.02-2mm

Lebelo la ho skena: Ho fihla ho 60fps

Min. bophahamo ba modumo: 5mm x 5mm x 5mm

Single Capture Range: 270mmx170mm@300mm

Sebaka sa ho sebetsa: 150mm-400mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa

>> NIR(lebone le hlophisitsoeng la infrared binocular) Mokhoa:

Ho nepahala: Ho fihlela ho 0.1mm

Qeto ea 3D: 0.1-2mm

Lebelo la ho skena: Ho fihla ho 20fps

Single Capture Range: 930mmx580mm@1000mm

Sebaka sa ho sebetsa: 170mm-1000mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa / geometry / sebopeho

Liparamente tse akaretsang:

Qeto ea khamera ea setšoantšo sa 3D: 1920x1200

Leseli la Tlatsetso ea Mobala: Li-LED tse 12 tse tšoeu

Ntlafatso ea Tsebiso ea Letšoao: Li-LED tse 12 tsa infrared

Tšireletseho ea Laser: Sehlopha sa I (se bolokehileng mahlong)

Konopo: Mechini

IMU: Ho joalo

Sebopeho sa tlhahiso: OBJ/STL/PLY

Matla a Kenang: 12V 2A

Sehokelo sa data: TypeC/USB3.0

Lisebelisoa: 215mmx50mmx74mm

Boima ba sesebelisoa: 372g

Boto ea ho lekanya: Boto ea likhalase e nepahetseng ka ho fetesisa

Scanning e senang Wireless: E ts'ehelitsoe mmoho le lisebelisoa tsa kamoso tsa ho sekena ka waelese

Ts'ehetso ea Sisteme: Windows / macOS

Mocheso o sebetsang: -10°C ho isa ho 40°C

Mongobo o sebetsang: 0-90%RH

Ho nepahala ho hlahlojoa maemong a laboratori (setekanyo ke 100mm sphere pair) mme liphetho tsa 'nete li ka angoa ke maemo a ts'ebetso joalo ka mocheso, thothomelo, le lintlha tse ling.

【24-Bit Full-Colour Scanner】Raptor Scanner E na le mabone a 12 a chitja a LED, e ka ntlafatsa ho benya ha 'mapa oa mebala sebakeng se lefifi le ho hlahisa 'mala oa lintho. scanning results.Blue Light Provides supplementary lightfor laser line scanning.White Light Used to enhance the brightness of color textures.
【Lintlafatso tse ling】1️⃣Le ntle le ho skena spray, o ka sekena likoloi, likarolo tsa koloi, lithaere, le lintho tse ling tse ntšo/tšepe ho fumana sephetho se lakatsehang.2️⃣'Mele o na le li-buttons 𝐋𝐢𝐠𝐡𝐭 e fana ka maikutlo a boemo ba nako ea ho hlahloba ka nako ea nnete,𝐏𝐚𝐢𝐫𝐞𝐝 𝐰𝐢𝐭𝐡 𝐁𝐮𝐭𝐭𝐨𝐧𝐬, e fana ka tshebetso e phutholohileng le e otlolohileng.3️⃣Lightweight 372g,One-hand Control,E fokotsa ka katleho mosebetsi wa nako e telele mokhathala ho nepahala calibration, o ka boloka ho nepahala ho phahameng ea scanner, boloka ho nepahala.
【Ho tsamaellana le sethala】U ka e sebelisa ho Windows kapa MacOS link scanner.CrealityScan ke sesebelisoa sa porofeshenale sa 3D se sebetsanang hantle le basebelisi le bokhoni bo matla ba ho sebetsana le leru. Ka lithuto tsa eona tsa mohato ka mohato, ts'ebetso ea ho tobetsa ha 'ngoe feela! le likarolo tsa ho hlophisa mohlala, e ka qala leeto la hau la ho senka habonolo.

Mokhoa oa ho Skena: Leseli le Leputsoa (Laser ea Blue 7-line) / NIR (lebone le hlophisitsoeng la infrared binocular)

>>Mokhoa oa Leseli le Leputsoa(Blue 7-line laser):

Ho nepahala: Ho fihla ho 0.02mm @ 100mm [1]

Qeto ea 3D: 0.02-2mm

Lebelo la ho skena: Ho fihla ho 60fps

Min. bophahamo ba modumo: 5mm x 5mm x 5mm

Single Capture Range: 270mmx170mm@300mm

Sebaka sa ho sebetsa: 150mm-400mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa

>> NIR(lebone le hlophisitsoeng la infrared binocular) Mokhoa:

Ho nepahala: Ho fihlela ho 0.1mm

Qeto ea 3D: 0.1-2mm

Lebelo la ho skena: Ho fihla ho 20fps

Single Capture Range: 930mmx580mm@1000mm

Sebaka sa ho sebetsa: 170mm-1000mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa / geometry / sebopeho

Liparamente tse akaretsang:

Qeto ea khamera ea setšoantšo sa 3D: 1920x1200

Leseli la Tlatsetso ea Mobala: Li-LED tse 12 tse tšoeu

Ntlafatso ea Tsebiso ea Letšoao: Li-LED tse 12 tsa infrared

Tšireletseho ea Laser: Sehlopha sa I (se bolokehileng mahlong)

Konopo: Mechini

IMU: Ho joalo

Sebopeho sa tlhahiso: OBJ/STL/PLY

Matla a Kenang: 12V 2A

Sehokelo sa data: TypeC/USB3.0

Lisebelisoa: 215mmx50mmx74mm

Boima ba sesebelisoa: 372g

Boto ea ho lekanya: Boto ea likhalase e nepahetseng ka ho fetesisa

Scanning e senang Wireless: E ts'ehelitsoe mmoho le lisebelisoa tsa kamoso tsa ho sekena ka waelese

Ts'ehetso ea Sisteme: Windows / macOS

Mocheso o sebetsang: -10°C ho isa ho 40°C

Mongobo o sebetsang: 0-90%RH

Mokhoa oa ho Skena: Leseli le Leputsoa (Laser ea Blue 7-line) / NIR (lebone le hlophisitsoeng la infrared binocular)

>>Mokhoa oa Leseli le Leputsoa(Blue 7-line laser):

Ho nepahala: Ho fihla ho 0.02mm @ 100mm [1]

Qeto ea 3D: 0.02-2mm

Lebelo la ho skena: Ho fihla ho 60fps

Min. bophahamo ba modumo: 5mm x 5mm x 5mm

Single Capture Range: 270mmx170mm@300mm

Sebaka sa ho sebetsa: 150mm-400mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa

>> NIR(lebone le hlophisitsoeng la infrared binocular) Mokhoa:

Ho nepahala: Ho fihlela ho 0.1mm

Qeto ea 3D: 0.1-2mm

Lebelo la ho skena: Ho fihla ho 20fps

Single Capture Range: 930mmx580mm@1000mm

Sebaka sa ho sebetsa: 170mm-1000mm

'Mapa oa mebala: E

Mokhoa oa ho tsamaisana: Lesupa / geometry / sebopeho

Liparamente tse akaretsang:

Qeto ea khamera ea setšoantšo sa 3D: 1920x1200

Leseli la Tlatsetso ea Mobala: Li-LED tse 12 tse tšoeu

Ntlafatso ea Tsebiso ea Letšoao: Li-LED tse 12 tsa infrared

Tšireletseho ea Laser: Sehlopha sa I (se bolokehileng mahlong)

Konopo: Mechini

IMU: Ho joalo

Sebopeho sa tlhahiso: OBJ/STL/PLY

Matla a Kenang: 12V 2A

Sehokelo sa data: TypeC/USB3.0

Lisebelisoa: 215mmx50mmx74mm

Boima ba sesebelisoa: 372g

Boto ea ho lekanya: Boto ea likhalase e nepahetseng ka ho fetesisa

Scanning e senang Wireless: E ts'ehelitsoe mmoho le lisebelisoa tsa kamoso tsa ho sekena ka waelese

Ts'ehetso ea Sisteme: Windows / macOS

Mocheso o sebetsang: -10°C ho isa ho 40°C

Mongobo o sebetsang: 0-90%RH

Ho nepahala ho hlahlojoa maemong a laboratori (setekanyo ke 100mm sphere pair) mme liphetho tsa 'nete li ka angoa ke maemo a ts'ebetso joalo ka mocheso, thothomelo, le lintlha tse ling.