Kirkirar Haƙiƙa CR 10 SE 3D Printer tare da Saurin Buga 600mm/s da Sprite Direct Extruder, 300°C Babban Zazzabi FDM 3D Printer

Creality CR-10 SE * yayi alƙawarin saurin gudu da haɓakawa. A matsayina na ƙwararren mai amfani da kewayon Creality, Na yi ɗokin ganin yadda wannan ƙirar ta yi daidai da magabata da masu fafatawa.

Wannan nazari mai zurfi mai zurfi yana nufin rarraba fasali, aiki, da ƙimar gaba ɗaya na CR-10 SE, yana ba da haske daga ƙwarewar hannuna mai yawa tare da na'ura.

WUTA AKE CANCANCI KAYAN KWANA: Don cimma bugu na 3D, zanen Laser, da milling CNC tare da firam iri ɗaya, CP-01 yana da zaɓuɓɓukan kayan aiki da yawa, ɗaya don kowane ɗayan ayyukansa. Kowane tsarin yana da haɗin haɗin duniya kuma yana da sauƙin musanya, don haka sake saita na'ura don canzawa tsakanin ayyuka daban-daban akai-akai bai kamata ya zama mai wahala ba.

STANDARD 3D MODULE BUGA: Ƙarfin FDM na wannan injin yana da ɗan ƙaramin matsakaici a cikin 2019: 200 mm cubed na ƙarar bugu, gado mai zafi wanda aka rufe a 100 ° C, da matsakaicin ƙudurin bugu na 0.1 mm. Ko da yake, idan Creality ya nuna mana wani abu, yana da cewa injinan su na iya yin "na al'ada" da kyau kuma akai-akai.

Ya bayyana cewa dandalin ginin yana buƙatar daidaitawa da hannu, haka nan. Amma tunda an yi gadon da gilashi, faɗa ba zai zama matsala ba. Daidaiton hannun hannu yakamata ya isa.

Kayayyakin da wannan injin ɗin aka bayyana karara don dacewa da su sune PLA, ABS, da TPU. Muna ɗauka wannan yana nufin cewa zaku iya bugawa da nau'ikan filaments masu ban mamaki, ban da kayan da ke buƙatar matsanancin yanayin zafi (watau polycarbonate) da kayan abrasive (watau yankakken fiber carbon fiber).

MULKIN CNC MATAKIN SHIGA: A matsayin na'ura na CNC, CP-01 na iya nutsar da ɗansa cikin filastik, itace, takarda, da PCB. Daidaituwa tare da karafa masu laushi kamar aluminum ba a bayyana a sarari ba, amma tare da firam da sandal kamar wannan, ba za mu yi fare a kai ba. Koyaya, kuna da filin murabba'in mm 200 don injin wasu kayan tare da sandar 4,800-rpm.

STANDARD LASER MODULE KYAUTA: Tare da Laser da aka ƙididdige ƙasa da 0.5W da yanki na zane na 100 x 190 mm, wannan madaidaicin matakin shigarwar Laser engraver ne. Kada ku yi tsammanin zai dace da na'urar zana Laser da aka keɓe dangane da aiki (ko aminci, don wannan al'amari), amma har yanzu ya isa ga kayan ado na lokaci-lokaci ko kayan ado na tebur. Tsarin zanen Laser na iya aiki tare da itace, takarda, filastik, da ƙari, bisa ga Creality.

GININ GINDI MAI GIRMA: Tun da ba mu da tabbataccen sakamakon bugu / CNC / zane daga wannan na'ura, duk da haka, za mu iya kawai tsinkaya a kwanciyar hankali na tsarin motsinta. An gina shi da farko daga extrusions na aluminum, CP-01 mai yiwuwa ya zama na'ura mai tsauri. Gaskiyar cewa ƙirar CNC ba ta da ƙarfi sosai, kuma cewa saurin bugu na 3D yana da ƙarfi a 80 mm/s yana ƙara ƙarfafa wannan zato.

KARBAR RASHIN WUTA: I n taron na asarar wutar lantarki, CP-01 yana da baya, tun da yake yana ba da zaɓi don ci gaba da inda kuka tsaya. Wannan fasalin daidai yake a cikin firintocin FDM 3D a yanzu, amma yana da kyau a gan shi a cikin duka-duka, kuma.

Shin zai yi nasarar kalubalantar Snapmaker a matsayin mai araha duk-in-daya? Shin zai ci gaba da zama a ƙafar ƙafar ƙarin zaɓuɓɓukan ƙima kamar ZMorph VX? Ya yi da wuri don faɗi, amma za mu yi kallo.