Halittu

Rukunin samfuran

Fitattun Kayayyakin

Bambu Lab AMS Lite Feeder Unit

Bambu Lab AMS - Tsarin Material Na atomatik

Bambu Lab Rear Metal Panel - X1 Series

Bambu Lab XY Belt Tensioner tare da Pulley

Bamboo Lab Thermistor - X1 Series

Bambu Micro Lidar (Dual Red Laser) - X1 Series

Bambu Lab PTFE Tube Connector

Rukunin Zafi na Lab ɗin Bambu V3 - Jerin X1

Bambu Lab Liquid Manne don Gina Farantin

Bambu Lab Maye gurbin Filament Cutter

0102030405

Creality Ender 3 S1 Plus

Samfura:Creality Ender 3 S1 Plus

BABBAR ENDER 3D PRINTER BUILD VOLUME: most Creality Ender-3 S1 da 3d firinta firinta ne na 3D yana ba da girman ginin karimci na 300 x 300 x 300 mm yana ba ku damar ƙirƙirar kwafin 3D mafi girma da rikitarwa. Wannan firinta shine haɓakawa zuwa jerin Ender-3 S1 kuma an san shi don haɓaka iyawa da fasalulluka.Tare da girman girman gininsa, Ender 3 S1 Plus yana ba ku damar buga samfura masu girma da kuma saduwa da buƙatun bugu mai faɗi.

Tuntube mu

samfurin bayani

BAYANI

LABARI MAI KYAUTA 4.3-INCH: Ƙirƙirar Babban Firintar FDM 3D ender 3 S1 da ƙari yana zuwa tare da mai amfani da UI yana goyan bayan harsuna 9. Dimming ta atomatik a cikin mintuna 3 don ceton kuzari. wanda ke ba da iko mai fahimta da kewayawa ga masu amfani. Allon taɓawa yana goyan bayan harsuna tara, yana sa ya dace ga masu amfani a duk duniya. Tare da wannan allon taɓawa, masu amfani za su iya yin hulɗa tare da firinta cikin sauƙi da samun dama ga saitunan da zaɓuɓɓuka daban-daban.

KYAUTA KYAUTA CR TOUCH AUTO: Creality auto leveling 3D Printer ender 3 S1 da aka ƙera don amfanin gida, ya haɗa da haɓakar fasalin CR Touch Auto. Wannan fasaha ta ci gaba tana kawar da buƙatar daidaitawar gado ta hannu, samar da ƙwarewar da ba ta da wahala ta haɓaka ta CR Touch. Tsarin daidaita madaidaicin atomatik na CR Touch yana amfani da fasahar daidaita gado ta atomatik mai maki 16. Yana aiki ta hanyar hankali ga bambance-bambancen tsayi a fadin gadon zafi

"SPRITE" CIKAKKEN KARFE DUAL-GEAR DIRECT EXTRUDER: Sabon extruder kai tsaye, mai nauyi da ƙarfi, yana tabbatar da ciyar da abinci mai santsi da ingantaccen bugu har ma da filaye masu sassauƙa. Mai jituwa tare da ƙarin filaments, Ender 3 S1 Plus 3d firintocin na iya buga PLA, TPU, PETG, ABS.etc. Ya fi sauƙi kuma yana fasalta ƙarancin rashin aiki da madaidaicin matsayi. Haɓakawa dual-gear kai tsaye extruder yana da nau'ikan kayan ƙarfe na chrome guda biyu waɗanda ke tsunduma cikin rabon gear 1:3.5.

DUAL Z-AXES DA AKA HAKA: Ender-3 S1 Plus 3D firintar haƙiƙa yana da haɗin gwiwar Z-axes guda biyu. Wannan saitin yana haɓaka kwanciyar hankali na aikin bugu kuma yana haɓaka daidaito gabaɗaya ta hanyar tabbatar da cewa ɓangarorin biyu na gantry suna tafiya cikin cikakkiyar aiki tare. Ta hanyar amfani da injunan stepper guda biyu na Z-axis da sukurori, Ender-3 S1 Plus na iya kiyaye daidaito da daidaita motsi tare da axis Z.

GASKIYA MAJALIYYA, MAI SAUKI GA KARIYA:Ender3 s1 Plus an riga an shigar da 96%, taro mai mataki 6, mai sauƙin amfani.

MAGANAR RASHIN WUTA & FILAMENT SENSOR: Ender-3 S1 Plus yana nuna aikin ganowar filament runout ko raguwa / asarar wutar lantarki da kuma ci gaba da bugawa bayan dawowa, yana taimakawa wajen kauce wa ɓarna na filaments da lokacin da hatsarori ke haifar da su.

bayanin 2

hali

Fasahar gyare-gyare:FDM

Gina Girma:300*300*300mm

Girman Injin:557*535*655mm

Girman Kunshin:625*590*230mm

Cikakken nauyi:10.25 kg

Cikakken nauyi:13.4kg

Gudun bugawa:s160mm/s,1500mm/s2
Daidaitaccen Buga:100mmt0.1mm

Tsawon Layer:0.1-035 mm

Yawan Nozzle:1

Diamita Nozzle:0.4 mm

Zazzabi Nozzle:har zuwa 260 ° C

Zafin gadon Zafi:har zuwa 100CBuild Surface: spring karfe PC Magnetic gina farantin

bayanin 2

siffofi

Buga samfuri masu girman girma, biyan ƙarin buƙatun bugu.

Gina Haɓaka Ƙarar - 300*300*300 mm

Matsayin atomatik na CR Touch mara wahala

"Sprite" Cikakken-karfe Dual-gear Direct Extruder

4.3-inch Touch Screen, Danna don Sarrafa

Aiki tare Dual Z-axes, Babban Madaidaicin Buga

Taro Mai Sauƙi, Mai Sauƙi don Gudanarwa

bayanin 2

Amfani

Har ila yau, firinta ya ƙunshi gadon Karfe na PC Spring, wanda ke tabbatar da kyakkyawan mannewa, amma cirewar sashi na iya zama da wahala. Ɗayan sanannen haɓakawa na Ender 3 S1 Plus shine haɗar fitar da fitar da kai tsaye, wanda ke ba da damar ƙarin ingantaccen sarrafa filament da ingantaccen bugu.

Ender 3 S1 Plus galibi sigar haɓaka ce ta Ender 3 S1 na yau da kullun, amma tare da ƴan haɓakawa waɗanda gabaɗaya suna ƙara sauƙin amfani. Tare da girman girman 300 x 300 x 300 mm, Plus yana da niyyar cike gibin da ke tsakanin asali, salon Ender 3, da CR-10 mai girman girman ginin, yana ba wa waɗanda ke jin dambe-a kan ƙananan magabata.

The Creality Ender 3 S1 Plus 3D firintar na'ura ce mai ƙarfi wacce ke da ikon isar da inganci, ingantaccen ƙwarewar bugu na 3D. Tare da ƙaƙƙarfan firam ɗin sa, dual Z-axis gubar sukurori, da kyakkyawan tsarin kula da aminci, a bayyane yake cewa an ƙera wannan firinta na 3D tare da inganci a zuciya.

Idan aka kwatanta da sauran firintocin 3D a cikin layin S1, ya faɗi wani wuri a tsakiya. Ba shi da wadatar fasali kamar nau'in Pro, amma ya zo tare da wasu sanannun haɓakawa akan S1 na yau da kullun. Ƙarar girman ginin sa yana sa Plus ta fice daga duka biyun.

bayanin 2

cikakkun bayanai

bayanin 2

FAQ

1. Menene zan yi idan kit ɗin bututun ƙarfe ya girgiza bayan an shigar da injin?

Matse goro a kan bangon baya na kayan bututun ƙarfe. Bayan gyara kuskure, zai iya zamewa hagu da dama. Idan ya takura sai ya daskare, idan kuma ya yi sako-sako sai ya girgiza.

2. Me yasa dandalin ke girgiza kadan bayan an shigar da na'ura?

Daidaita kwaya mai ɗaci a ƙafafun V na gado mai zafi. Idan ya yi sako-sako, sai ya girgiza, idan kuma ya takura, sai ya daskare.

3. Shin ana buƙatar shigar da madaidaicin iyaka na Z-axis?

Ba a buƙatar shigarwa ta tsohuwa. Lokacin da CR-Touch mai daidaitawa ta atomatik ya gaza, ana buƙatar shigar da maɓalli na iyaka na Z-axis, kuma ana buƙatar daidaitawar hannu.